An audiometer is a machine used by ENT (ear, nose and throat) clinics and audiology centers to measure hearing loss. Audiometers are typically part of the equipment used during an audiometry test. There are both software and hardware-based audiometers available in the market.
The hardware-based version is a simple piece of equipment that generates a pure tone at varying intensities that can be controlled. The subject hears the tones in one ear at a time through headphones. Every time a tone is heard, the subject pushes a feedback button.
The device can be a standalone machine or hooked up to a computer that controls the output and records all the feedback. These machines are made using different kinds of technologies, depending on the intended usage. Some are portable, others handhelds, and still others may be full-fledged systems that are meant to be used in one place. All of them are either bone-conduction or air-conduction audiometers.
Software-based systems function in pretty much the same way, sending out a tone to the subject on a headphone and collecting feedback through a button. The difference is in the way the tone is generated. In this case, the software merely sends out stored tones to the computer's sound card.
Audiometers built as a physical machine are more expensive, but provide the high degree of accuracy that hospitals, researchers and audiology centers need. Regular calibration is still essential to ensure the tone heard and the level shown in the display match each other. Proper calibration is also necessary to ensure a global standard for testing and measurement of hearing levels.
Audiometry software may be used as an alternative to a whole new machine. It will be cheaper and can be used by anyone at home and without assistance. However, calibration of the software is much more difficult and accuracy harder to obtain. People can still use it for regular testing, and only seek expert medical opinion if they discover any hearing loss.
The point of all this, whether it is a software or hardware-based system, is to find out exactly when the subject stops hearing the tone. This helps physicians diagnose hearing problems and provide treatment. It usually involves at least a bit of ear cleaning and perhaps some ear drops, if not a hearing aid or even surgery.
Industrial audiometric testing also needs the same audiometers, and the process followed is about the same as described above. However, subjects are not required to go the clinic or audiology center. Rather, a mobile lab packed with all the equipment and technicians is dispatched to the industrial facility to evaluate how workers are being affected by the onsite noise.
The results are not only used to evaluate hearing loss, but also to decide whether the facility needs to implement noise muffling mechanisms. Such regular on-site checkups may also be required in group health plans in order to protect workers from any further loss in their hearing ability. An audiometer used in such applications must be extremely accurate, calibrated to within fractions of a decibel.
The hardware-based version is a simple piece of equipment that generates a pure tone at varying intensities that can be controlled. The subject hears the tones in one ear at a time through headphones. Every time a tone is heard, the subject pushes a feedback button.
The device can be a standalone machine or hooked up to a computer that controls the output and records all the feedback. These machines are made using different kinds of technologies, depending on the intended usage. Some are portable, others handhelds, and still others may be full-fledged systems that are meant to be used in one place. All of them are either bone-conduction or air-conduction audiometers.
Software-based systems function in pretty much the same way, sending out a tone to the subject on a headphone and collecting feedback through a button. The difference is in the way the tone is generated. In this case, the software merely sends out stored tones to the computer's sound card.
Audiometers built as a physical machine are more expensive, but provide the high degree of accuracy that hospitals, researchers and audiology centers need. Regular calibration is still essential to ensure the tone heard and the level shown in the display match each other. Proper calibration is also necessary to ensure a global standard for testing and measurement of hearing levels.
Audiometry software may be used as an alternative to a whole new machine. It will be cheaper and can be used by anyone at home and without assistance. However, calibration of the software is much more difficult and accuracy harder to obtain. People can still use it for regular testing, and only seek expert medical opinion if they discover any hearing loss.
The point of all this, whether it is a software or hardware-based system, is to find out exactly when the subject stops hearing the tone. This helps physicians diagnose hearing problems and provide treatment. It usually involves at least a bit of ear cleaning and perhaps some ear drops, if not a hearing aid or even surgery.
Industrial audiometric testing also needs the same audiometers, and the process followed is about the same as described above. However, subjects are not required to go the clinic or audiology center. Rather, a mobile lab packed with all the equipment and technicians is dispatched to the industrial facility to evaluate how workers are being affected by the onsite noise.
The results are not only used to evaluate hearing loss, but also to decide whether the facility needs to implement noise muffling mechanisms. Such regular on-site checkups may also be required in group health plans in order to protect workers from any further loss in their hearing ability. An audiometer used in such applications must be extremely accurate, calibrated to within fractions of a decibel.
About the Author:
You can visit the website www.henanmedical.com for more helpful information about Accurate Hearing Loss Evaluations With An Audiometer
No comments:
Post a Comment